I spent some time this afternoon taking technical performance data on the new amp. Unsurprisingly, the technical data is in agreement with my impressions from the excellent listening session yesterday. This amp is a solid performer and just what I wanted from the design.
Continue readingThe voltage checks all came out as expected, so the amplifier was put into use for an extended listening session. The most succinct description I can give is that the amplifier is clean, very fast, neutral in color, and musically powerful.
Continue readingHere’s the salient point about putting your entire amplifier design and build process on the internet for all to see. Invariably, regardless of how well everything is going, things always arise which manage to keep you humble. And today it happened again.
Continue readingThis morning I took a little time to complete the major wiring of the amplifier. Everything is in place except the B+ dropping resistor.
Continue readingI got a chance to do a little work on the amp today. I managed to install the top plate on the spalted alder chassis, install the filter inductors for the power stages, connect the output transformer secondaries to the speaker terminals, and wire in the power transformer primary and indicator light.
Continue readingIn the last few days I’ve managed to get most of the wiring on the 6L6 SE-UL top plate complete. This includes all the preposterously large power supply filter capacitors.
Continue readingI got a little more done on the amp this afternoon. The grid and cathode circuits on both power stages are now wired and tied into the driver.
Continue readingI’ve managed to make a little progress on the driver stage of the amplifier. And another project is coming along well.
Continue readingThis is just a quick post to let everyone know that I have made some progress on the subject amp’s wiring. Unfortunately, there is a complicating factor which is slowing me down.
Continue readingToday I took some time to install the signal ground bus and wire the transformers. But I also wanted to discuss a specific aspect of transformer wiring for the B+. I often get questions on this topic from people looking at the 6336 SET Amplifier. Let’s take a look.
Continue readingThe paint seemed to be good and hard this afternoon. So when I got a little free time, I decided to start assembly.
Continue readingI’m still waiting for the top plate paint to harden. But that didn’t keep me from getting some wiring done on the chassis today.
Continue readingI know that I told myself I was going to give the paint on the 6L6 SE-UL top plate a week to harden before I started assembly. But then I thought “Hey there’s other assembly I could perform”. So that’s what I did.
Continue readingA while back in this post, “6L6 SE-UL Primed for Progress“, I mentioned that I would no longer be painting the exposed bottom plates of projects which won’t be seen. What that statement actually meant was that I would be leaving the aluminum in a bare “as delivered” finish. Or maybe with just a little steel wool polishing. But I’m now modifying that stance slightly.
Continue readingWhile spray painting some metal this week a funny thing happened. During the painting session, the hair on my arms began to stand on end to the extent that it was readily apparent that something strange was happening. This led me to perform some investigations.
Continue reading