I took some time this afternoon to get the metal work completed (mostly) for the Source Selector Unit/Preamp. All the drilling is complete and everything is properly fit to the chassis. The only metal work left to do is four holes in the mounting brackets which need to be drilled and tapped. These four screws will hold the top plate in place and make swapping tubes easier.
Continue readingWell, eleven days since my last post and the cedar fence is done, the garden is in, a toilet has been replaced, and a new batch of black cherry cider is in the fermenter. So I decided it was time to get back to the metal for the source selector unit.
Continue readingI’ve been working on a whole bunch of different projects this last week. But I managed to carve out a little time to get all the chassis metal for the source selector unit cut to size, fit to the chassis, and marked for drilling.
Continue readingI often get questions about how I design and construct my projects. One of the things I realized this morning, after receiving such a question, was that I really haven’t addressed my basic metal work and how I size all the aluminum parts I use for my chassis. So I thought I’d give a little insight into how I make these cuts and how I got to where I am today.
Continue readingI’ve been catching up on all my spring chores and managed to steal a couple of hours in the shop this morning. The Source Selector Unit chassis is now all sanded. I also took the time to cut and fit the aluminum for the top and bottom plates. Now my attention will turn to getting all the holes laid out and drilled on the aluminum.
Continue readingSince my last post on the Source Selector Unit chassis I’ve been busy. Spring has finally started here with a vengeance so I’ve been tackling a few different projects. But rest assured, the chassis work will be back to the forefront soon.
Continue readingI actually spent a fair amount of time thinking about how to dress the chassis edges for the Source Selector Unit. But after much deliberation, a couple of scrap tests, and some evolution in thought as it progressed, I believe I’ve found a solution I really like.
Continue readingA good friend of mine, who’s opinion I value, has made a suggestion concerning the Source Selection Unit chassis. And I’m looking for some input.
Continue readingThe chassis for the Source Selector Unit / Preamp is out of the clamps. I removed the clamps, cleaned up the little bit of glue squeeze out at the joints, and gave it a light sanding. It looks fantastic.
Continue readingToday, I did a little drilling and then got the chassis into glue up.
Continue readingBefore I perform the chassis glue up, I decided I wanted to get the two pieces of metal for the back drilled. This means I can make the pilot holes for the mounting screws in the inside of the back without having to work with a drill inside the glued up chassis. It’s a little thing but it makes the first assembly go that much smoother.
Continue readingSo I had another productive day working on the Source Selector Unit / Preamp chassis. The chassis has all the major woodworking complete and is ready for glue up.
Continue readingI got some time today to make grain decisions and cut some basic joinery. It finally feels like I’m making progress.
Continue readingSince I picked the wood for the Source Selector Unit/Preamp project yesterday, I decided to spent some time in the shop today getting the chassis pieces milled to thickness and cut to size.
Continue readingAfter a difficult and focused three months or so, I am finally getting back to my normal routines. And that means I’m returning to work on my Source Selector Unit/Preamp project. Thank you to everyone who has had patience with my absence from the website.
Continue reading