This morning as I sat down in my office to check email and the like, I looked over at the amp in the corner of the room and made a snap decision. It was time to perform a SET swap.
Continue readingTag Archives: 6CY7
A Different Twist
I often get emails and pictures from builders that have built some of the projects I’ve posted here at CascadeTubes. I like seeing all the different ways that people have taken what I provided and modified it to put their own spin on the project.
Continue readingA/B Testing
I was arranging some things today in preparation for an event this evening and happened to have a little Class-D amp in my office that I normally use in my wood shop. So I decided to try a little A/B testing.
Continue readingIntroducing the 6CY7 Zebrawood
So it’s been a while since I first grabbed the plank of Zebrawood in my shop and envisioned it wrapped around an amplifier. That was June 13th. Here it is a little over two months later and I now actually have a functioning amplifier. I have to say I’m pretty happy with how it turned out.
Continue readingSlow Progress
As some may already know, I’ve been working on a new version of the 6CY7 amplifier. There is a new chassis specifically designed for this amp and some circuit changes to improve performance. But here’s the issue, I can’t seem to get much done. Let me explain.
Continue readingWaiting for Paint
So I’ve had the chassis and metal done for the 6CY7 V2 amp since the 4th of July. It has now been a full 13 days and… the paint is not yet fully cured. It is hard for me to remember it ever taking this long for a semi-gloss enamel on metal to cure hard enough to begin assembly work. Obviously the manufacturer has changed the solvent makeup of the paint I use. Time to find another manufacturer. In the mean time, I’ve been working on other things.
Continue readingWood and Metal
Well, the new version of the 6CY7 amp is coming together. The wood for the amp has gone from a raw 11″ x 58″ plank of Zebra Wood {Microberlinia brazzavillensis} into a finished amplifier chassis complete with four coats of Tru-Oil finish. I think it looks pretty good.
Continue readingA Productive Day
So I usually have multiple amp projects going on at any one time. There is a rather large project that I’ve been working on but it’s going rather slowly and I was hungry to make some progress on something. As such, I decided to tackle a smaller project I first prototyped in 2011 and that has been on hold since 2015. I spent the better part of today turning an 11″ x 58″ plank of Zebra Wood {Microberlinia brazzavillensis} into an amp chassis.
Continue reading