Lots of work has been going on the last couple of days working on an alternate buffer design for the 12AU7 “Color” preamp. As readers should know, I was not particularly pleased with the performance of the previous buffer circuit. It was bottoming out at too low a voltage. Now however, I have a simple change which yields much better results.
Continue readingThis afternoon I completed the “color” preamp and tried it out. I am very happy with the results.
Continue readingThe “Color” preamp has been checked out on the test bench and everything is working per design. Bias points are good and the gain stage is operating exactly as designed. However, the buffer design I used was from a different project, and it operates differently in this project than the last one.
Continue readingI had thought that the coupling capacitors I ordered on Tuesday would not arrive until this Saturday. However, the gods of DIY decided to smile down upon me and the capacitors showed up in today’s mail delivery. In my opinion, two days from order to delivery is exceptional. I spent some time this afternoon with a soldering iron in hand and the Color Preamp is now fully assembled.
Continue readingI made significant progress today. Most of the signal stage wiring is done. I could finish it up in about half an hour, but there are two little blockages in my path; one due to a supplier problem, one due to me.
Continue readingI’ve been working on the color preamp over the last few days as I’ve had time. My volume control and output capacitors are supposed to arrive today so it shouldn’t take too much longer to finish it up. However working inside the small chassis is a challenge.
Continue readingSince I’m still waiting for appropriate weather to finish the 6AS7 SET chassis, I’ve been making progress on a small project for the aluminum chassis from the last post. I decided to put together the “Color” preamp from the post a few days ago. This project will make use of one of the Hammond discount power transformers about which I posted a couple of weeks ago. It’s coming along well, but VERY slowly.
Continue readingFor a while now, ever since the “Universal Preamp” was posted on the site, I’ve been getting steady requests for a good tube preamp to provide some color to solid state amplifiers. My initial answer to this problem was to design a good quality cathode follower for the Universal Preamp. There was one problem, the volume control.
Continue readingAs everyone who’s tried to buy one knows, power transformers for tube projects can be expensive. Even small transformers for small projects. But today I stumbled on a great deal for a small preamp power transformer made by Hammond.
Continue readingSince I first introduced the concept for the “Universal Preamp” over ten years ago on the DIYAudioProjects forum, there has been almost constant discussion of my decision to place the volume control on the output of the preamp. I have been asked questions about it numerous times over the years. I have also had some “spirited discussions” with some who vehemently disagree with that design decision. Well, I thought it was high time to explain that decision once and for all, and to discuss exactly what this configuration means for preamp performance and output impedance.
Continue readingSo, I was sitting here on this rainy Sunday morning going through some amplifier designs and looking through my stash of tubes and various amplifier building supplies. While standing there looking at the shelves of vacuum tubes, transformers, and various piece-parts, my eyes drifted up to an amplifier sitting on the top shelf. It was my 6AS5 µ-power UL amplifier documented here. But why was the little amp sitting on a shelf collecting dust? Then I remembered.
Continue reading